Payment & Shipping Terms:
|Storage:||2TB 2.5"ssd+128GB Sd Card||Alarm Input:||4chs|
|Alarm Output:||2 Chs||Waterproof Level:||IP67|
|Warranty:||12 Months||Keywords:||Waterproof Mobile Ssd Car Dvr|
mobile digital video recorder,
hd digital video recorder
|System||Language||English / Chinese|
|Operation Interface||Graphical User Interface(OSD menu)|
|Password Security||2 Levels: Administrator & User|
|Video||Video Input||A:Supports 4 channels CIF/HD1/D1/960H camera Video input
B:Supports 4 channels 720P AHD camera Video input
C:Supports 2-CH 720P AHD + 2-CH 960H analog mixing Video input
D:Supports 1-CH 720P/1080P IPC + 4-CH 960H/D1/CIF Video input
E:Supports 1-CH 720P/1080P IPC + 4-CH 720P AHD Video input
|Video Output||1 Channels (Rear Panel on RJ45&AV-OUT Port)|
|Video Display||Single picture, 1~5 pictures|
|Signal System||PAL / NTSC ( PAL@100 frame 720P/sec; NTSC@120 frame 720P/sec )|
|Image Compression||H.264 Main profile|
|Audio||Audio Input||4 Channels|
|Audio Output||1 Channel|
|Record Format||Synchronized A/V recording|
Q: What shall we do when a problem that could not be solve occurs to the product?
A: Record product model and software version number and submit detailed problem description to our technical support engineer for analysis. Detailed description will be very helpful to our analysis.
Q: What shall we do when the mobile device has no video output?
A: 1. Check the power status of the device. If only one blue indicator is lit up, it indicates that the device is still in standby mode and not powered on; at the same time, check if red or yellow cable of the main power is supplied normally; If not, the device cannot be started.
2. Check if the display is powered and if the display video is switched to AV status.
3. Check the connection status of the video output cable and display.
4. Check the lock status the mainframe lock; the device can be started only when the lock is locked.
Q: What shall we do when the mainframe video input interface is different from the camera input interface?
A: a 4-pin interface is used for the vehicle device. BNC interface or air interface is used for the camera. If inconsistency is found, please use an adapter or connect it to a standard line defined as the line sequence for the vehicle device.
Contact Person: Alicia Long